{"id":89426,"date":"2026-11-21T16:52:21","date_gmt":"2026-11-21T08:52:21","guid":{"rendered":"https:\/\/lintyco.de\/kaffeebohnen-verpackung\/"},"modified":"2026-11-21T16:52:21","modified_gmt":"2026-11-21T08:52:21","slug":"kaffeebohnen-verpackung","status":"publish","type":"post","link":"https:\/\/lintyco.de\/en\/kaffeebohnen-verpackung\/","title":{"rendered":"Packaging Coffee Beans: CO\u2082 Outgassing, One-Way Valves, and Bag Sizes"},"content":{"rendered":"<h2>Whole beans come with their own set of requirements<\/h2>\n<p>The market share of whole-bean coffee is growing in the DACH region by about 4 to 5% per year, and in the premium segment, it is growing faster than ground filter coffee. To meet this demand, roasters are seeking machinery that fulfills three requirements simultaneously: format flexibility ranging from 100-gram samples to 1-kilogram packages, integrated valve application, and reproducible low-oxygen bags. This article covers the product side\u2014outgassing, formats, and the barrier. The mechanical engineering perspective on the same line is discussed in the article on <a href=\"https:\/\/lintyco.de\/en\/vertikale-schlauchbeutelmaschine-kaffeebohnen\/\">Vertical form-fill-seal machine for coffee beans<\/a>; the basics of valves in the article on <a href=\"https:\/\/lintyco.de\/en\/kaffee-aromaschutz\/\">Flavor Preservation for Coffee<\/a>.<\/p>\n<h2>CO\u2082 outgassing dictates the schedule<\/h2>\n<p>Freshly roasted beans release 6 to 10 mg of CO\u2082 per gram of beans during the first 24 to 72 hours after roasting. The rate of release is not linear:<\/p>\n<ul>\n<li>Round <strong>60% of the CO\u2082<\/strong> escape within the first 24 hours after roasting.<\/li>\n<li>The remaining <strong>40 %<\/strong> are spread out over the next 4 to 6 days.<\/li>\n<li>A 250-gram package releases a total of up to 2.5 liters of CO\u2082.<\/li>\n<\/ul>\n<p>If the bag is sealed without pressure equalization, excess pressure builds up: The bag visibly swells, and in extreme cases, the cross-seal may burst. There are two ways to solve this problem: Allow the beans to degas in a controlled manner for 12 to 48 hours before packaging\u2014during which time some flavor compounds will escape\u2014or, immediately after roasting and cooling, use <strong>Check valve<\/strong> packaging. The valve opens at a pressure of approximately 0.02 bar, allowing CO\u2082 to escape while retaining oxygen; for packages weighing 1 kg or more, two valves are installed in parallel to accommodate the larger volume of gas. The complete valve mechanism is included with the product <a href=\"https:\/\/lintyco.de\/en\/kaffee-aromaschutz\/\">Flavor Preservation for Coffee<\/a>.<\/p>\n<h2>Four Bag Sizes and Their Roles<\/h2>\n<table>\n<thead>\n<tr>\n<th><strong>Format<\/strong><\/th>\n<th><strong>Typical capacity<\/strong><\/th>\n<th><strong>Characteristics<\/strong><\/th>\n<th><strong>Format Change<\/strong><\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Doy-Pack (stand-up pouch)<\/td>\n<td>250 g to 1 kg<\/td>\n<td>Industry standard, large print area, valve located at the top right of the seal edge<\/td>\n<td>15 to 20 minutes<\/td>\n<\/tr>\n<tr>\n<td>Quad-Seal Bags<\/td>\n<td>500 g to 1 kg<\/td>\n<td>Premium block design, precise volume control, diagonal valve position<\/td>\n<td>20 to 30 minutes<\/td>\n<\/tr>\n<tr>\n<td>Block-bottom bags<\/td>\n<td>1 kg<\/td>\n<td>Classic family-size package, easy to fold by machine<\/td>\n<td>10 to 12 minutes<\/td>\n<\/tr>\n<tr>\n<td>Side-gusseted bags<\/td>\n<td>100 g<\/td>\n<td>Sample format with low material costs, up to 120 bags per minute.<\/td>\n<td>less than 10 minutes<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>Two design factors must be taken into account in the cost calculation: The bottom fold of the Doy-Pack increases material consumption by 12 to 15% compared to flat pouches, and the four seal seams of the Quad-Seal bag increase the seam length by about 40%\u2014both factors must be included in the film cost calculation, which is the key driver for the item <a href=\"https:\/\/lintyco.de\/en\/folienkosten-senken\/\">Reduce Film Costs<\/a> covered in detail. A valve window in the film does not protrude into any of these seams: The valve position is specified in the recipe and is format-dependent.<\/p>\n<h2>Low in oxygen in a sealed bag<\/h2>\n<p>The target after sealing is less than 2% residual oxygen; in the premium segment, it is less than 1%. Without purging, the bag remains at 8 to 12%\u2014thereby reducing the shelf life to 4 to 6 months. The target value is achieved through a <strong>N\u2082 purge line<\/strong>, which is fed into the open bag before cross-sealing. Nitrogen consumption increases with the package size: approximately 0.3 to 0.5 liters per 250-gram bag, 0.8 to 1.2 liters per 500-gram bag, and 1.5 to 2 liters per 1-kilogram bag. The immersion depth and flushing duration are stored in the recipe based on the format; the flushing process technology is explained in the article on <a href=\"https:\/\/lintyco.de\/en\/kaffee-aromaschutz\/\">Flavor Preservation for Coffee<\/a>.<\/p>\n<h2>Materials: Aluminum vs. Mono-PE<\/h2>\n<ul>\n<li><strong>PET\/AL\/PE (12\/7\/60 to 80 \u00b5m):<\/strong> The aluminum interlayer provides the strongest barrier (oxygen permeability below 0.5 cm\u00b3\/m\u00b2\u00b7d) and is therefore the standard for a shelf life of 12 to 18 months. For dark roasts with a higher oil content on the bean surface, the high barrier is particularly beneficial because lipid oxidation on the surface would otherwise lead to flavor defects.<\/li>\n<li><strong>Kraft paper\/AL\/PE:<\/strong> A paper-like appearance for artisanal and organic brands with the same barrier level; the paper layer is more challenging to process and requires tighter web tolerances.<\/li>\n<li><strong>Mono-PE with EVOH:<\/strong> Recyclable in the PE stream; oxygen permeability of 2 to 3 cm\u00b3\/m\u00b2\u00b7d\u2014sufficient for a shelf life of 6 to 9 months for 250 g, but not yet for 18 months and 1 kg, because cumulative oxygen uptake over the long shelf life dominates the loss of flavor.<\/li>\n<\/ul>\n<p>A transparent window in the center of the bag interrupts the aluminum layer; the barrier performance in this area deteriorates by a factor of about ten. If you want windows, design them to be small and flanked by full-surface cover printing.<\/p>\n<h2>Machine Side: VFFS with Valve Applicator<\/h2>\n<p>The standard line for whole beans is a <a href=\"https:\/\/lintyco.de\/en\/vertikale-full-und-verschliesmaschine\/\">Vertical filling and capping machine<\/a> with three additional stations:<\/p>\n<ol>\n<li><strong>Dosing via a linear scale<\/strong> with an accuracy of \u00b10.2 g; beans should not be placed on a screw conveyor, but rather on a weighing or vibrating feeder.<\/li>\n<li><strong>Inline Valve Applicator:<\/strong> Valve material from the roll\u2014cut, position, and weld in less than 1 second. One roll holds about 4,000 valves, and it takes 2 minutes to change the roll.<\/li>\n<li><strong>N\u2082 Purge Station<\/strong> between dosing and cross-sealing, controlled based on the format.<\/li>\n<\/ol>\n<p>The production rate is 40 to 80 bags per minute for the 250-g Doy-Pack; for the 1-kg format, 30 to 40 bags per minute is realistic; above that, the mechanical stress on the forming shoulder increases and maintenance intervals become shorter. Switching from 250 g to 1 kg involves changing the forming shoulder, web width, and scale division in under 20 minutes; all parameters, including valve position and immersion depth, are specified in the format recipe. For Quad-Seal Premium formats, a premade pouch line with a capacity of 35 to 60 pouches per minute is an alternative\u2014a basic comparison is provided in the <a href=\"https:\/\/lintyco.de\/en\/vffs-ratgeber\/\">VFFS Guide<\/a>. The overview of all formats and machine types begins in the Hub <a href=\"https:\/\/lintyco.de\/en\/kaffee-verpackungsloesungen\/\">Packaging Coffee<\/a>; the product page for the <a href=\"https:\/\/lintyco.de\/en\/kaffeeverpackungsmaschine\/\">Coffee Packaging Machine<\/a> groups the configurations.<\/p>\n<p>For logistics purposes, a Euro pallet holds approximately 1,440 250-gram Doy-packs in 8 layers of 180 packs each (360 kg net weight); 1-kg block-bottom bags amount to 480 pieces and 480 kg. These values determine the design of the downstream palletizing and wrapping modules.<\/p>\n<h2>Frequently Asked Questions<\/h2>\n<h3>Does every package of beans need a one-way valve?<\/h3>\n<p>Yes, with one exception: vacuum-sealed packages. However, vacuum sealing is uncommon for whole beans because the external pressure causes the beans to split, and cracked shells detract from their appearance. For Doy-Pack, Quad-Seal, and block-bottom packages, the valve is mandatory.<\/p>\n<h3>What is a realistic production rate for 1-kg packages?<\/h3>\n<p>30 to 40 bags per minute. Higher cycle rates require wider webs or double spools; at rates above 40 bags per minute, the load on the molding shoulder increases noticeably, and maintenance intervals are shortened accordingly.<\/p>\n<h3>Can the line be converted from 250 g to 1 kg?<\/h3>\n<p>Yes. The format change switches the mold shoulders, pouch web width, and dosing scale graduation in less than 20 minutes; the valve position, the immersion depth of the flushing lance, and the sealing temperature are specified in the format recipe.<\/p>\n<h3>Can recyclable single-material products replace aluminum?<\/h3>\n<p>For 250-gram packages with a shelf life of 6 to 9 months, yes\u2014mono-PE with EVOH achieves 2 to 3 cm\u00b3\/m\u00b2\u00b7d. For 18 months and 1 kilogram, aluminum remains the reliable barrier.<\/p>\n<h3>Is nitrogen purging required?<\/h3>\n<p>Recommended for all packages with a target residual oxygen level below 2%: Without purging, 8 to 12% remains in the bag, and the flavor retention drops to 4 to 6 months. For sample bags with a short shelf life, flushing can be omitted; for premium espresso, it is mandatory.<\/p>\n<p><strong>Related pages:<\/strong> <a href=\"https:\/\/lintyco.de\/en\/kaffee-aromaschutz\/\">Flavor Preservation for Coffee<\/a> | <a href=\"https:\/\/lintyco.de\/en\/gemahlener-kaffee-verpackung\/\">Packaging Ground Coffee<\/a> | <a href=\"https:\/\/lintyco.de\/en\/vertikale-schlauchbeutelmaschine-kaffeebohnen\/\">Vertical form-fill-seal machine for coffee beans<\/a> | <a href=\"https:\/\/lintyco.de\/en\/kaffee-verpackungsloesungen\/\">Packaging Coffee: The Eight Formats<\/a><\/p>\n<hr>\n<p>Request technical specifications and a quote for your production line. Please specify the product, bag size, and target output (bags\/min.) \u2013 <a href=\"https:\/\/lintyco.de\/en\/kontaktieren-sie-uns\/\">Request Technical Specifications and a Quote<\/a>.<\/p>","protected":false},"excerpt":{"rendered":"<p>Freshly roasted beans release several liters of CO\u2082 per kilogram during the first few days\u2014without a valve, the bag swells; without purging, the aroma oxidizes. This article presents degassing curves, bag sizes, and the appropriate machinery.<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"neve_meta_sidebar":"","neve_meta_container":"","neve_meta_enable_content_width":"","neve_meta_content_width":0,"neve_meta_title_alignment":"","neve_meta_author_avatar":"","neve_post_elements_order":"","neve_meta_disable_header":"","neve_meta_disable_footer":"","neve_meta_disable_title":"","neve_meta_reading_time":"","footnotes":""},"categories":[1],"tags":[286,285,198],"class_list":["post-89426","post","type-post","status-publish","format-standard","hentry","category-blog","tag-co-ausgasung","tag-einwegventil","tag-kaffeebohnen"],"_links":{"self":[{"href":"https:\/\/lintyco.de\/en\/wp-json\/wp\/v2\/posts\/89426","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/lintyco.de\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/lintyco.de\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/lintyco.de\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/lintyco.de\/en\/wp-json\/wp\/v2\/comments?post=89426"}],"version-history":[{"count":0,"href":"https:\/\/lintyco.de\/en\/wp-json\/wp\/v2\/posts\/89426\/revisions"}],"wp:attachment":[{"href":"https:\/\/lintyco.de\/en\/wp-json\/wp\/v2\/media?parent=89426"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/lintyco.de\/en\/wp-json\/wp\/v2\/categories?post=89426"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/lintyco.de\/en\/wp-json\/wp\/v2\/tags?post=89426"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}