跳至正文

Filling 3-in-1 Coffee Sticks: Formula, Stick-Pack Technology, and Materials

3-in-1 coffee sticks combine instant coffee, sugar, and powdered milk in a single serving—three powders with different flow characteristics on a single production line. This article discusses formulations, the selection of the number of lanes, and the five challenges of production.

Table of Contents

Three powders, one tube

3-in-1 coffee sticks combine instant coffee, sugar, and powdered milk in a slim tubular pouch. This format originated in Asian markets; it has been growing in Europe for several years—initially in Eastern and Southern Europe, and now also in the HoReCa segment of Western Europe. Technically, the line is a multi-lane Stitch-sewing packaging machine with one distinctive feature: Two separate powder streams do not meet until they reach the downpipe, because a pre-homogenized mixture segregates during production and transport. The granulate component of the formulation is processed by the same family of machines as the Instant Coffee Packaging Machine.

Formulation and Portioning

The standard recipe consists of 35 to 50% instant coffee, 30 to 40% sugar, and 15 to 25% milk powder or coffee creamer. Each stick is filled with 12 to 20 g—the standard for the Asian market is 12 to 15 g, while the European premium segment ranges from 18 to 20 g. The three components have very different bulk densities:

  • Instant coffee: 300 to 380 kg/m³, highly hygroscopic, mechanically fragile granules.
  • Sugar: 800 to 850 kg/m³; flows well but becomes sticky at relative humidity levels above 60%.
  • Powdered milk: 450 to 550 kg/m³, extremely hygroscopic, tends to form bridges in the hopper.

The production environment is therefore maintained at 45 to 55% relative humidity and 20 to 24 degrees Celsius. The following applies to dissolution time in the cup: spray-dried granules (particle size 800 to 1,500 µm) dissolve in under 15 seconds and are the standard; freeze-dried granules, which take 20 to 30 seconds, are used only in the premium segment. The line itself ensures homogeneity: mixing takes place inline or immediately before filling, never from a pre-homogenized big bag.

Stick-Pack Technique: Tracks Instead of Individual Beats

A machine processes 4 to 12 lanes in parallel, each with its own film feed, its own collar attachment, and its own cross-sealing station. The film width per lane is 18 to 30 mm.

Number of tracks Application Typical annual volume
4 tracks 200 to 400 bags per minute. up to about 60 million sticks
8 tracks 400 to 800 bags per minute. starting at about 60 million sticks
12 tracks 800 to 1,500 bags per minute. starting at about 100 million sticks

The rule of thumb for the number of lanes: Annual demand in millions of sticks divided by 6,000 net operating hours yields the required cycle rate; 30 million sticks per year equate to 100 bags per minute—achievable with 4 lanes, each with 25 lane cycles. The Dual-Dosing Station feeds coffee and sugar (often premixed) via one screw conveyor, and milk powder or non-dairy creamer via the second; the two streams do not meet until they reach the drop chute. The drop height must remain below 200 mm; otherwise, the granules break apart and the fine dust contaminates the seal. Ultrasonic sealing has an advantage here because it does not burn powder particles into the seam; the seam strength is 4 to 6 N per 15 mm (heat sealing) or 6 to 8 N (ultrasonic). Per stick, the production line uses only 0.3 to 0.6 g of film—significantly less than a three-side-sealed sachet with the same fill volume; a roll with a length of 6,000 to 12,000 m is changed every 30 to 60 minutes. Product changes (3-in-1, black coffee, white coffee) take 30 to 60 minutes for format adjustments plus 90 to 120 minutes for hopper cleaning.

Four Material Strategies

Material Oxygen permeability Shelf Life Use
PET/PE 5 to 15 cm³/m²·d 6 to 9 months European standard portions and HoReCa portions
PET/AL/PE less than 0.5 cm³/m²·d 18 to 24 months Exports to tropical climates
Mono-PE with EVOH 1 to 3 cm³/m²·d 9 to 12 months PPWR-compliant recyclable lines
PVOH (water-soluble) dissolves in the cup 6 to 9 months Premium HoReCa Without Disposable Plastic Wrap

The total film thickness ranges from 70 to 90 µm; the transverse seal is 2 to 3 mm wide, and the longitudinal seal is 3 to 5 mm wide. The choice of barrier material depends on the distribution channel: European distribution requires only PET/PE or mono-PE, while long export routes at 30 degrees Celsius and 80% humidity require an aluminum barrier. The material science behind film laminates is generally covered in the article on Sachet Materials, the question: Sachet or slim stick—a comparison Sachet or bag.

Five Challenges in Production

  1. Bonding: Sugar and milk powder stick to the sealing jaws as soon as the product temperature or humidity rises too high. Solutions: cooled sealing jaws, exhaust ventilation in the sealing area, climate-controlled facility.
  2. Granular Aeration: If the drop height is too great, the granules are crushed into dust. Short drop pipes with vibration support and bypass venting keep the particles intact.
  3. Dosing accuracy ±0.2 g: For a fill quantity of 12 to 20 g, this corresponds to a tolerance of 1.0 to 1.7%—achievable only with calibrated screws and load cells under each track. The recipe typically drifts by 0.3 to 0.5% over the course of a shift and is recalibrated every half hour.
  4. Cross-contamination: Three products on a single line require separate product hoppers and separate conveyor routes; cleaning between product changes takes 30 to 60 minutes.
  5. Shelf Life by Distribution Channel: The choice of material depends on the expected storage and transport conditions, not on the brand—the table above serves as the basis for decision-making.

The hub provides the framework for integrating the embroidery line into the overall packaging strategy Packaging Coffee; the article on the automation level across multiple lines discusses Sachet Automation.

Frequently Asked Questions

What plant size is appropriate for 100,000 sticks per day?

With 8 hours of net operation and 75% OEE, that amounts to approximately 210 bags per minute. A 4-lane line with 60 lane cycles per minute (240 total) can handle that; Plan for a 20% reserve for product changes and maintenance.

How long do 3-in-1 coffee sticks last?

With PET/AL/PE, 12 to 18 months even when stored at warm temperatures; with PET/PE or mono-PE, 6 to 12 months depending on the composite; water-soluble PVOH film, 6 to 9 months. Measurable loss of aroma begins on the 60th day of storage; the loss becomes noticeable to the taste on the 180th day of storage.

Do sugar substitutes like stevia or erythritol work?

Yes, with some adjustments. Stevia is so sweet that the filling amount drops to 1 to 2 g and the mixing ratio changes; erythritol has the same volume as sugar and runs through the same screw conveyors, but it is more hygroscopic—so keeping the environment dry becomes more important. Both require a recalibration of the recipe.

How is the mixture kept stable throughout its shelf life?

The mixture is created inline or immediately before filling—never from a pre-homogenized storage tank, because the mixture separates during transport. The design solution consists of two separate product hoppers that are combined only in the downpipe.

Does the line need its own milk powder environment?

The milk powder line must be separated from the instant coffee line or thoroughly cleaned between product changes—milk powder is the most hygroscopic and most prone to bridging of the three powders, and it determines the cleaning intervals for the line.

Related pages: Stitch-sewing packaging machine | Instant Coffee Packaging Machine | What is a sachet machine? | Packaging Coffee: The Eight Formats


Request technical specifications and a quote for your production line. Please specify the product, bag size, and target output (bags/min.) – Request Technical Specifications and a Quote.

Picture of Evelyn

Evelyn

As an expert with 16 years of experience and over 300 completed projects, my goal is to provide you with the most suitable packaging solution right from the start.

Sign up for our newsletter

We select the most popular case studies from over 4,000 orders placed by our customers to help you find the right project for your success.

en_USEnglish